User Manual for XinMeng M75 Mechanical Keyboard

The Xinmeng M75 is bringing a fresh breeze to the 75% mechanical keyboard market. With affordable prices and dreamy sound quality, the M75 have won over many users.

 

The packaging includes a multi-language manual.

 

I. Software and Driver Setup

 

After downloading the software, connect the keyboard to your computer via the USB cable provided. Then, open the software and configure the LED settings and keymap according to your personal needs. If there is a new firmware version, make sure the USB connection is stable before updating.

 

II. Adjusting Connection Modes

 

Bluetooth Connection (Switch the toggle on the keyboard to BT):

 

1. Press and hold the FN + Q keys for a few seconds.

 

2. Open the Bluetooth device you want to connect (e.g., mobile phone, computer).

 

3. The device will connect, and the pairing process is complete.

 

4. To connect to the second device (e.g., phone), if the first device (e.g., laptop) is connected to Q, hold FN + W for a few seconds and the W indicator will flash rapidly. Then repeat steps 2 and 3.

 

5. To connect to the third device (e.g., tablet), hold FN + E for a few seconds until the E indicator flashes briefly. Then repeat steps 2 and 3.

 

6. Now, turn on Bluetooth on all three devices and switch between devices by pressing FN + Q/W/E (When switching, just press FN Q/W/E once, DO NOT hold it as during the pairing process).

 

Wireless 2.4G Connection (Switch the keyboard toggle to 2.4G):

 

The manufacturer has designed a slot for the wireless receiver near the Mac/Win switch.

 

Once you find the receiver, plug it into a USB port on your computer, and you are good to go.

 

Wired Connection (Switch the toggle to the middle position):

 

Just plug in the cable and start using.

 

III. Common Key Combinations

 

  • FN + Left Alt: Check battery (M75 only; M75Pro uses the screen to check battery).
  • FN + ESC: Reset LED.
  • FN + Left WIN: Lock or unlock the WIN key.
  • FN + \ |: Change LED mode.
  • FN + Del: Change LED color.
  • FN + Right Ctrl: Change LED border mode.
  • FN + Up Arrow: Increase LED brightness.
  • FN + Down Arrow: Decrease LED brightness.
  • FN + Left Arrow: Decrease LED blinking speed.
  • FN + Right Arrow: Increase LED blinking speed.
  • FN + Tab: Change LED to white.
  • FN + Backspace: Turn LED on/off.

 

For Windows:

 

  • FN + F1: Decrease brightness.
  • FN + F2: Increase brightness.
  • FN + F3: Open Computer.
  • FN + F4: WIN + E (Open My Computer).
  • FN + F5: Open music player.
  • FN + F6: Previous track.
  • FN + F7: Next track.
  • FN + F8: Pause/Play music/video.
  • FN + F9: Stop music/video.
  • FN + F10: Mute.
  • FN + F11: Decrease volume.
  • FN + F12: Increase volume.

 

For Mac:

 

  • F1: Decrease brightness.
  • F2: Increase brightness.
  • F3: Mission control.
  • F4: Siri.
  • F5: App multitasking.
  • F6: Search.
  • F7: Previous track.
  • F8: Next track.
  • F9: Pause/Play music/video.
  • F10: Mute.
  • F11: Decrease volume.
  • F12: Increase volume.

 

IV. Tips and Notes for Use

 

  • When not in use, the keyboard will automatically turn off the LED and enter sleep mode. To wake it up, just press any key.
  • A tip for checking the remaining battery through Bluetooth: Go to your Bluetooth settings and look for your keyboard. The battery status will be displayed.
  • When checking the battery, M75 will show green from 1-0 as fully charged, and red from 1-3 as low battery.
  • Always charge the keyboard through a USB port on your computer; do not charge it with a power bank, laptop, earphones, phone, etc.