User Manual for XinMeng M87Pro Mechanical Keyboard

The Xinmeng M87 Pro is one of the best keyboards in its price range. With a TKL layout, RGB backlighting, 3 connection modes, and more, the Xinmeng M87 Pro is sure to satisfy users. 

 

Here is the summarized usage tips to make it easier to follow.

 

I. Software and Driver Setup

 

Download link for Windows software: 

M87 Pro Wireless Driver (Google Drive)

M87 Pro Wired Driver (Google Drive)

 

After downloading the software, connect the keyboard to your computer via the provided USB cable (do not use Bluetooth or 2.4G wireless connection). Then, open the software and adjust the LED settings and keymap based on your personal preferences. If there is a new firmware version available, make sure the USB connection is stable before updating.

 

II. Adjusting Connection Modes

 

Bluetooth Connection (Switch the toggle on the underside of the keyboard to BT): 

 

1. Press and hold the FN + Q keys simultaneously for a few seconds.

 

2. Open the Bluetooth device you wish to connect to (e.g., mobile phone, computer).

 

3. The device will be connected, and the pairing process will be complete.

 

4. To connect the second device (e.g., phone), if the first device (e.g., laptop) is connected to the first slot, press and hold FN + W for a few seconds, and the indicator for the second slot will blink quickly. Then, repeat steps 2 and 3.


5. To connect the third device (e.g., tablet), press and hold FN + E for a few seconds until the indicator for slot 3 blinks briefly. Then repeat steps 2 and 3.

 

6. Now, turn on Bluetooth on all three connected devices and switch between them by pressing FN + Q/W/E (When switching devices, press FN Q/W/E just once, DO NOT hold it like when pairing).

 

Wireless 2.4G Connection (Switch the toggle on the underside of the keyboard to 2.4G):

 

The manufacturer has designed a slot for the wireless receiver next to the Bluetooth switch.

 

Press and hold FN + R simultaneously until the indicator light on the directional keys blinks quickly, then plug the receiver into a USB port on your computer to start using it.

 

Wired Connection (Switch the toggle on the underside of the keyboard to the middle position):

 

Simply plug in the cable and use the keyboard.

 

III. Common Key Combinations

 

  • FN + ESC: Reset LED settings.
  • FN + Left WIN: Lock or unlock the WIN key.
  • FN + \ |: Change LED mode on the keyboard.
  • FN + END: Change the LED mode of the top LED strip above the directional keys.
  • FN + ENTER: Change LED color.
  • FN + CAPS (hold for 5 seconds): Reset LED color.
  • FN + Up Arrow: Increase LED brightness.
  • FN + Down Arrow: Decrease LED brightness.
  • FN + Left Arrow: Decrease LED blinking speed.
  • FN + Right Arrow: Increase LED blinking speed.
  • FN + Right Alt: Check battery. If the LED strip shows green, the battery is full; yellow means the battery is at a normal level, and red means the battery is low.

 

IV. Tips and Important Notes

 

  • When you notice that the Alt and Win keys switch places, it means you are in MAC mode. Switch the toggle on the front side of the keyboard to Win mode.
  • If the LED light on the LED strip turns red, it means the battery is low. You should charge the keyboard as soon as possible to ensure it operates properly and to extend the battery’s lifespan.
  • Always charge the keyboard through a USB port on your computer; do not charge it with a power bank, laptop charger, earphones, phone, etc.